Engine

Selected Engine:

B48/B46 Generation 1 & 2 (MG1 ECU)

Selected stage:

125 USD

STAGE 1

125 USD

STAGE 2

179 USD
Generation 2 B48 Engine

Engine power levels

Stock
Horsepower

184 hp

Torque

270 Nm ( 199 lb-ft)

after
Horsepower

310 hp

Torque

430 Nm ( 317 lb-ft)

Dyno diagrams

Dragy times

Fuel

ACN91
RON

91/95
RON

93/98
RON

94/100
RON

Supported Gen 2 Models

BMW M135i
F40
BMW 218i, 220i, 230i
G42
BMW 320i, 325i, 330i, 330e
G20, G21, G28
BMW 420i, 430i
G22, G23, G26
BMW 520i, 530i, 530e
G30, G31, G38
BMW 630i
G32
BMW 730i, 730Li, 740e, 740Le
G11
BMW X3, X4 20i, 30i
G01, G02
BMW Z4 20i, 30i
G29
Toyota Supra
A90 (J29)

Additional info

POWER INCREASE

Flashing License 299 USD - required to flash any OTS map

184 hp Model: Up to 310 hp (231kW) and 317 lb-ft (430 Nm) @ Crank
Cars with stock exhaust system

Designed for the drivers who want the most out of their stock component vehicle. This software is intended to safely maximize your vehicle’s potential performance. The power curve has been delicately engineered to eliminate any dips in the overall powerband as well as maximizing delivery of that power throughout the entire RPM range.

NOTE: Models other than 184 hp are also supported. These values should be used as a guide for other B46/B48 revisions as well.

TECHNICAL INFORMATION

Additional options available with each OTS map
- Exhaust burble adjustable on-the-fly, set the intensity without reflashing!
- *Switchable maps on-the-fly, select between maps (including ethanol blends up to E30) without reflashing!
- Max Cooling on-the-fly, enable the option without reflashing!
- Speed limiter removal
- Cold start delete (off-road use only)
- Catalytic converter delete (dcat, off-road use only)
- Startup roar
- Torque by gear limiter
- NBT Display HP/TQ gauges calibration
- Valet mode (CC v7.1 Coming Soon!)
- Flex Fuel support (CC v7.3 Coming Soon!)
- Motiv ReFlex integration (CC v7.2 Coming Soon!)
- See full list of Custom Options
- See full list of Custom Code features

*Switchable Maps are currently available for Gen 1 & Gen 2 B48/B58 BMWs. Gen 1 OTS maps have map slots populated. Gen 2 OTS maps do not have switchable map slots populated. Gen 2 switchable map slots can be populated by custom tuners.

Generation 1 B48 Engine

Engine power levels

Stock
Horsepower

252 hp

Torque

350 Nm ( 258 lb-ft)

after
Horsepower

305 hp

Torque

430 Nm ( 317 lb-ft)

Power levels above are for the 252 hp model. For a point of reference, displayed power output of original software is based of our measurement on our dyno. This can give you an idea of the exact delta gain of our software vs the various stages of what is considered stock software.

184 hp model:
Baseline: 195 hp & 282 Nm (208 lb-ft), measured by our dyno
Baseline: 184 hp & 270 Nm (199 lb-ft), BMW factory specification

252 hp model:
Baseline: 252 hp & 362 Nm (267 lb-ft), measured by our dyno
Baseline: 252 hp & 350 Nm (258 lb-ft), BMW factory specification

Dyno diagrams

Dragy times

Fuel

ACN91
RON

91/95
RON

93/98
RON

94/100
RON

E30
Mix

E40
Mix

Supported Gen 1 Models

BMW 120i, 125i
F20
BMW 220i, 225i, 230i, 228i, M235i
F22, F44
BMW 318i, 320i, 330i, 330e
F30, F31, F34
BMW 420i, 430i
F32, F33, F34, F36
BMW 520i, 530i, 530e
G30
BMW X1, X2, X3, X4 20i, 25i, 28i, 30i, M35i
F48, F39, G01, G02

Switchable Map Slot Info

Custom Code v6.0 (via Cruise Control)

Custom Code v5.4 (via Pedals & MSA)

Additional info

POWER INCREASE

Flashing License 299 USD - required to flash any OTS map

184 hp Model: Up to 290 hp (216 kW) and 310 lb-ft (420 Nm) @ Crank
252 hp Model: Up to 305 hp (227 kW) and 317 lb-ft (430 Nm) @ Crank
Cars with stock exhaust system

Designed for the drivers who want the most out of their stock component vehicle. This software is intended to safely maximize your vehicle’s potential performance. The power curve has been delicately engineered to eliminate any dips in the overall powerband as well as maximizing delivery of that power throughout the entire RPM range.

NOTE: Models other than 184 hp and 252 hp are also supported. These values should be used as a guide for other B46/B48 revisions as well.

TECHNICAL INFORMATION

Additional options available with each OTS map
- Exhaust burble adjustable on-the-fly, set the intensity without reflashing!
- *Switchable maps on-the-fly, select between maps (including ethanol blends up to E30) without reflashing!
- Max Cooling on-the-fly, enable the option without reflashing!
- Speed limiter removal
- Cold start delete (off-road use only)
- Catalytic converter delete (dcat, off-road use only)
- Startup roar
- Torque by gear limiter
- NBT Display HP/TQ gauges calibration
- Valet mode (CC v7.1 Coming Soon!)
- Flex Fuel support (CC v7.3 Coming Soon!)
- Motiv ReFlex integration (CC v7.2 Coming Soon!)
- See full list of Custom Options
- See full list of Custom Code features

*Switchable Maps are currently available for Gen 1 & Gen 2 B48/B58 BMWs. Gen 1 OTS maps have map slots populated. Gen 2 OTS maps do not have switchable map slots populated. Gen 2 switchable map slots can be populated by custom tuners.

Generation 2 B48 Engine

Engine power levels

Stock
Horsepower

184 hp

Torque

270 Nm ( 199 lb-ft)

after
Horsepower

340 hp

Torque

470 Nm ( 347 lb-ft)

Dyno diagrams

Dragy times

Fuel

ACN91
RON

91/95
RON

93/98
RON

94/100
RON

Supported Gen 2 Models

BMW M135i
F40
BMW 218i, 220i, 230i
G42
BMW 320i, 325i, 330i, 330e
G20, G21, G28
BMW 420i, 430i
G22, G23, G26
BMW 520i, 530i, 530e
G30, G31, G38
BMW 630i
G32
BMW 730i, 730Li, 740e, 740Le
G11
BMW X3, X4 20i, 30i
G01, G02
BMW Z4 20i, 30i
G29
Toyota Supra
A90 (J29)

Additional info

POWER INCREASE

Flashing License 299 USD - required to flash any OTS map

184 hp Model: Up to 340 hp (254 kW) and 347 lb-ft (470 Nm) @ Crank

Use only with High Flow Downpipe
or High Flow Catalytic Converter

For the spirited drivers who want the maximum power out of their vehicle equipped with high flow downpipe or high flow catalytic converter. This software is intended to maximize your vehicle’s potential performance. The power curve has been delicately engineered to eliminate any dips in the overall powerband as well as maximizing delivery of that power throughout the entire RPM range.

NOTE: Models other than 184 hp and 252 hp are also supported. These values should be used as a guide for other B46/B48 revisions as well.

MG Flasher Custom Code allows users to go beyond the factory 440 Nm limit!
See Transmission Limiter information below.

Our software is fully compatible with xHP transmission tuning

TECHNICAL INFORMATION

Additional options available with each OTS map
- Exhaust burble adjustable on-the-fly, set the intensity without reflashing!
- *Switchable maps on-the-fly, select between maps (including ethanol blends up to E30) without reflashing!
- Max Cooling on-the-fly, enable the option without reflashing!
- Speed limiter removal
- Cold start delete (off-road use only)
- Catalytic converter delete (dcat, off-road use only)
- Startup roar
- Torque by gear limiter
- NBT Display HP/TQ gauges calibration
- Valet mode (CC v7.1 Coming Soon!)
- Flex Fuel support (CC v7.3 Coming Soon!)
- Motiv ReFlex integration (CC v7.2 Coming Soon!)
- See full list of Custom Options
- See full list of Custom Code features

*Switchable Maps are currently available for Gen 1 & Gen 2 B48/B58 BMWs. Gen 1 OTS maps have map slots populated. Gen 2 OTS maps do not have switchable map slots populated. Gen 2 switchable map slots can be populated by custom tuners.

TRANSMISSION LIMITER INFORMATION

Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery. The factory torque limiter is set to 440 Nm (325 lb-ft) at the crank. We are the first to offer a solution to lift this limit up to 1000 Nm by using our custom code! The limit is adjustable in app.

Generation 1 B48 Engine

Engine power levels

Stock
Horsepower

252 hp

Torque

350 Nm ( 258 lb-ft)

after
Horsepower

335 hp

Torque

465 Nm ( 343 lb-ft)

Power levels above are for the 252 hp model. For a point of reference, displayed power output of original software is based of our measurement on our dyno. This can give you an idea of the exact delta gain of our software vs the various stages of what is considered stock software.

184 hp model:
Baseline: 195 hp & 282 Nm (208 lb-ft), measured by our dyno
Baseline: 184 hp & 270 Nm (199 lb-ft), BMW factory specification

252 hp model:
Baseline: 252 hp & 362 Nm (267 lb-ft), measured by our dyno
Baseline: 252 hp & 350 Nm (258 lb-ft), BMW factory specification

Dyno diagrams

Dragy times

Fuel

ACN91
RON

91/95
RON

93/98
RON

94/100
RON

E30
Mix

E40
Mix

Supported Gen 1 Models

BMW 120i, 125i
F20
BMW 220i, 225i, 230i, 228i, M235i
F22, F44
BMW 318i, 320i, 330i, 330e
F30, F31, F34
BMW 420i, 430i
F32, F33, F34, F36
BMW 520i, 530i, 530e
G30
BMW X1, X2, X3, X4 20i, 25i, 28i, 30i, M35i
F48, F39, G01, G02

Switchable Map Slot Info

Custom Code v6.0 (via Cruise Control)

Custom Code v5.4 (via Pedals & MSA)

Additional info

POWER INCREASE

Flashing License 299 USD - required to flash any OTS map

184 hp Model: Up to 320 hp (227 kW) and 328 lb-ft (445 Nm) @ Crank
252 hp Model: Up to 335 hp (250 kW) and 343 lb-ft (465 Nm) @ Crank

Use only with High Flow Downpipe
or High Flow Catalytic Converter

For the spirited drivers who want the maximum power out of their vehicle equipped with high flow downpipe or high flow catalytic converter. This software is intended to maximize your vehicle’s potential performance. The power curve has been delicately engineered to eliminate any dips in the overall powerband as well as maximizing delivery of that power throughout the entire RPM range.

NOTE: Models other than 184 hp and 252 hp are also supported. These values should be used as a guide for other B46/B48 revisions as well.

MG Flasher Custom Code allows users to go beyond the factory 440 Nm limit!
See Transmission Limiter information below.

Our software is fully compatible with xHP transmission tuning

TECHNICAL INFORMATION

Additional options available with each OTS map
- Exhaust burble adjustable on-the-fly, set the intensity without reflashing!
- *Switchable maps on-the-fly, select between maps (including ethanol blends up to E30) without reflashing!
- Max Cooling on-the-fly, enable the option without reflashing!
- Speed limiter removal
- Cold start delete (off-road use only)
- Catalytic converter delete (dcat, off-road use only)
- Startup roar
- Torque by gear limiter
- NBT Display HP/TQ gauges calibration
- Valet mode (CC v7.1 Coming Soon!)
- Flex Fuel support (CC v7.3 Coming Soon!)
- Motiv ReFlex integration (CC v7.2 Coming Soon!)
- See full list of Custom Options
- See full list of Custom Code features

*Switchable Maps are currently available for Gen 1 & Gen 2 B48/B58 BMWs. Gen 1 OTS maps have map slots populated. Gen 2 OTS maps do not have switchable map slots populated. Gen 2 switchable map slots can be populated by custom tuners.

TRANSMISSION LIMITER INFORMATION

Software calibration without the need for any transmission tuning or skewing the torque/load calculation model maps. This allows for accurate calculations, smooth shifting and no software trickery. The factory torque limiter is set to 440 Nm (325 lb-ft) at the crank. We are the first to offer a solution to lift this limit up to 1000 Nm by using our custom code! The limit is adjustable in app.

Engine power levels

Stock
Horsepower

184 hp

Torque

270 Nm ( 199 lb-ft)

after
Horsepower

0 hp

Torque

0 Nm ( 0 lb-ft)

Power levels above are for the 252 hp model. For a point of reference, displayed power output of original software is based of our measurement on our dyno. This can give you an idea of the exact delta gain of our software vs the various stages of what is considered stock software.

184 hp model:
Baseline: 195 hp & 282 Nm (208 lb-ft), measured by our dyno
Baseline: 184 hp & 270 Nm (199 lb-ft), BMW factory specification

252 hp model:
Baseline: 252 hp & 362 Nm (267 lb-ft), measured by our dyno
Baseline: 252 hp & 350 Nm (258 lb-ft), BMW factory specification

Fuel

ACN91
RON

91/95
RON

93/98
RON

94/100
RON

E30
Mix

E40
Mix

Supported Gen 1 Models

BMW 120i, 125i
F20
BMW 220i, 225i, 230i, 228i, M235i
F22, F44
BMW 318i, 320i, 330i, 330e
F30, F31, F34
BMW 420i, 430i
F32, F33, F34, F36
BMW 520i, 530i, 530e
G30
BMW X1, X2, X3, X4 20i, 25i, 28i, 30i, M35i
F48, F39, G01, G02

Switchable Map Slot Info

Custom Code v6.0 (via Cruise Control)

Custom Code v5.4 (via Pedals & MSA)

Additional info

**Under development**

Flashing License 299 USD - required to flash any OTS map

Additional options

Switchable Maps

Switchable Maps On-The-Fly
WORLD'S FIRST CRUISE CONTROL SOLUTION FOR BMW GEN 1 AND GEN 2 B58/B48
Through the control buttons you can quickly select between various maps without the need for a reflash!
*Gen 2 cars support switchable maps functionality, but map slots in MG Flasher OTS maps are currently empty. Please see our instructions below for details.
*MINIs, S58 and S63 switchable maps, including all ethanol maps, are under development.
For full updated instructions, please see the
User Manual

Exhaust Burbles & Flaps On-The-Fly

On-The-Fly Instructions
Our unique function Dynamic Burble On-The-Fly is accessible through the Custom Code Menu via a simple combination of cruise control buttons. This feature allows you to change the intensity of the burbles ON THE FLY! There are 6 switchable levels available including Burble OFF in all modes.
Gen 1 and Gen 2 B48 and B58 BMWs supported

Through the Custom Code Menu, you can also open and close the Exhaust Flaps
on the fly with the cruise control rockers!

Antilag

Antilag (Rolling Launch) allows for building boost quicker to obtain a more powerful acceleration.

Youtube Video (Rolling Antilag Demo)
Antilag brings faster acceleration with the click of the cruise control button. Full in app adjustability in both Basic and Expert mode, allows for endless customization and fine tuning.

Antilag is accessible On-The-Fly through the Custom Code Menu. Disclaimer: For off-road/racing use only.

Max Cooling

On-The-Fly Instructions

There will now be two options available for cooling your engine: Regular Cooling and Max Cooling. Use “Regular Cooling” with regular driving, then switch to “Max Cooling” with a quick and easy cruise control button sequence in the Custom Code Menu. Max Cooling is achieved by lowering the target engine temperature and increasing the target intercooler coolant volume flow, targeting the temperature set in app while flashing.

Gen 1 and Gen 2 B48 and B58 BMWs supported!

TCU Torque Limiter & Remote Start

The TCU Torque limiter Bypass is available starting with Custom Code(CC) v0.5. This feature dynamically removes the torque limits set by the TCU when no intervention is required, and allows torque limitations when wheel slippage is detected (such as on a launch or gear change with a high power engine).

Additionally, starting with CC v0.5 Remote Start is also retained for cars that had the feature from factory.

Please see our Custom Code instructions for more information.

Flex Fuel Support

Flex Fuel is supported starting with Custom Code v7.2 (Coming Soon!).

With an Ethanol CAN Bus Sensor Installed, the ECU can read, log and display ethanol data while also using the data to automatically adjust the required parameters to the given ethanol level. Ethanol Content Display

If no Ethanol Content Sensor is installed, the user can specify ethanol content on the fly with cruise control rockers. This will also be used to automatically adjust the required parameters to the given ethanol level. Ethanol Content Override

Motiv ReFlex Support

MG Flasher will add the ability to log various parameters from the ReFlex module directly in the MG Flasher app with Custom Code (v7.2+ Coming Soon).

MG Flasher is able to log various parameters from the ReFlex module directly in the MG Flasher app, while also detecting errors from the ReFlex module and entering MG Flasher’s own Limp Mode.

Please see our instruction manual for up to date information on Motiv ReFlex Integration

Startup Roar & Cold Start

Users have the ability to disable the factory calibrated Cold Start. The Cold Start increases RPMs at idle when the engine is cold. Choosing this option lowers the RPMs which make for a quieter sound when starting a cold engine.

Alternatively, you can also enable the Startup Roar. This option enables a louder and more aggressive Startup Roar also known as “GTS Startup”. The roar duration and the aggression can be adjusted using the in app sliders. We recommend trying out various calibrations to decide which settings sound the best.

More Options

For a full, detailed list of options offered by MG Flasher, please see our Custom Options page, as well as our Custom Code page.

Please refer to our User Manual for up to date information, and stay tuned for announcements regarding updates with new features on our social media pages!

DISCLAIMER

MG Flasher offers products intended only for competition racing/off-road use which may not be road legal in your region. MG Flasher accepts no responsibility for compliance with vehicle’s factory warranty or road legality.

Additional options

Switchable Maps

Switchable Maps On-The-Fly
WORLD'S FIRST CRUISE CONTROL SOLUTION FOR BMW GEN 1 AND GEN 2 B58/B48
Through the control buttons you can quickly select between various maps without the need for a reflash!
*Gen 2 cars support switchable maps functionality, but map slots in MG Flasher OTS maps are currently empty. Please see our instructions below for details.
*MINIs, S58 and S63 switchable maps, including all ethanol maps, are under development.
For full updated instructions, please see the
User Manual

Exhaust Burbles & Flaps On-The-Fly

On-The-Fly Instructions
Our unique function Dynamic Burble On-The-Fly is accessible through the Custom Code Menu via a simple combination of cruise control buttons. This feature allows you to change the intensity of the burbles ON THE FLY! There are 6 switchable levels available including Burble OFF in all modes.
Gen 1 and Gen 2 B48 and B58 BMWs supported

Through the Custom Code Menu, you can also open and close the Exhaust Flaps
on the fly with the cruise control rockers!

Antilag

Antilag (Rolling Launch) allows for building boost quicker to obtain a more powerful acceleration.

Youtube Video (Rolling Antilag Demo)
Antilag brings faster acceleration with the click of the cruise control button. Full in app adjustability in both Basic and Expert mode, allows for endless customization and fine tuning.

Antilag is accessible On-The-Fly through the Custom Code Menu. Disclaimer: For off-road/racing use only.

Max Cooling

On-The-Fly Instructions

There will now be two options available for cooling your engine: Regular Cooling and Max Cooling. Use “Regular Cooling” with regular driving, then switch to “Max Cooling” with a quick and easy cruise control button sequence in the Custom Code Menu. Max Cooling is achieved by lowering the target engine temperature and increasing the target intercooler coolant volume flow, targeting the temperature set in app while flashing.

Gen 1 and Gen 2 B48 and B58 BMWs supported!

TCU Torque Limiter & Remote Start

The TCU Torque limiter Bypass is available starting with Custom Code(CC) v0.5. This feature dynamically removes the torque limits set by the TCU when no intervention is required, and allows torque limitations when wheel slippage is detected (such as on a launch or gear change with a high power engine).

Additionally, starting with CC v0.5 Remote Start is also retained for cars that had the feature from factory.

Please see our Custom Code instructions for more information.

Flex Fuel Support

Flex Fuel is supported starting with Custom Code v7.2 (Coming Soon!).

With an Ethanol CAN Bus Sensor Installed, the ECU can read, log and display ethanol data while also using the data to automatically adjust the required parameters to the given ethanol level. Ethanol Content Display

If no Ethanol Content Sensor is installed, the user can specify ethanol content on the fly with cruise control rockers. This will also be used to automatically adjust the required parameters to the given ethanol level. Ethanol Content Override

Motiv ReFlex Support

MG Flasher will add the ability to log various parameters from the ReFlex module directly in the MG Flasher app with Custom Code (v7.2+ Coming Soon).

MG Flasher is able to log various parameters from the ReFlex module directly in the MG Flasher app, while also detecting errors from the ReFlex module and entering MG Flasher’s own Limp Mode.

Please see our instruction manual for up to date information on Motiv ReFlex Integration

Startup Roar & Cold Start

Users have the ability to disable the factory calibrated Cold Start. The Cold Start increases RPMs at idle when the engine is cold. Choosing this option lowers the RPMs which make for a quieter sound when starting a cold engine.

Alternatively, you can also enable the Startup Roar. This option enables a louder and more aggressive Startup Roar also known as “GTS Startup”. The roar duration and the aggression can be adjusted using the in app sliders. We recommend trying out various calibrations to decide which settings sound the best.

More Options

For a full, detailed list of options offered by MG Flasher, please see our Custom Options page, as well as our Custom Code page.

Please refer to our User Manual for up to date information, and stay tuned for announcements regarding updates with new features on our social media pages!

DISCLAIMER

MG Flasher offers products intended only for competition racing/off-road use which may not be road legal in your region. MG Flasher accepts no responsibility for compliance with vehicle’s factory warranty or road legality.

Additional options

Switchable Maps

Switchable Maps On-The-Fly
WORLD'S FIRST CRUISE CONTROL SOLUTION FOR BMW GEN 1 AND GEN 2 B58/B48
Through the control buttons you can quickly select between various maps without the need for a reflash!
*Gen 2 cars support switchable maps functionality, but map slots in MG Flasher OTS maps are currently empty. Please see our instructions below for details.
*MINIs, S58 and S63 switchable maps, including all ethanol maps, are under development.
For full updated instructions, please see the
User Manual

Exhaust Burbles & Flaps On-The-Fly

On-The-Fly Instructions
Our unique function Dynamic Burble On-The-Fly is accessible through the Custom Code Menu via a simple combination of cruise control buttons. This feature allows you to change the intensity of the burbles ON THE FLY! There are 6 switchable levels available including Burble OFF in all modes.
Gen 1 and Gen 2 B48 and B58 BMWs supported

Through the Custom Code Menu, you can also open and close the Exhaust Flaps
on the fly with the cruise control rockers!

Antilag

Antilag (Rolling Launch) allows for building boost quicker to obtain a more powerful acceleration.

Youtube Video (Rolling Antilag Demo)
Antilag brings faster acceleration with the click of the cruise control button. Full in app adjustability in both Basic and Expert mode, allows for endless customization and fine tuning.

Antilag is accessible On-The-Fly through the Custom Code Menu. Disclaimer: For off-road/racing use only.

Max Cooling

On-The-Fly Instructions

There will now be two options available for cooling your engine: Regular Cooling and Max Cooling. Use “Regular Cooling” with regular driving, then switch to “Max Cooling” with a quick and easy cruise control button sequence in the Custom Code Menu. Max Cooling is achieved by lowering the target engine temperature and increasing the target intercooler coolant volume flow, targeting the temperature set in app while flashing.

Gen 1 and Gen 2 B48 and B58 BMWs supported!

TCU Torque Limiter & Remote Start

The TCU Torque limiter Bypass is available starting with Custom Code(CC) v0.5. This feature dynamically removes the torque limits set by the TCU when no intervention is required, and allows torque limitations when wheel slippage is detected (such as on a launch or gear change with a high power engine).

Additionally, starting with CC v0.5 Remote Start is also retained for cars that had the feature from factory.

Please see our Custom Code instructions for more information.

Flex Fuel Support

Flex Fuel is supported starting with Custom Code v7.2 (Coming Soon!).

With an Ethanol CAN Bus Sensor Installed, the ECU can read, log and display ethanol data while also using the data to automatically adjust the required parameters to the given ethanol level. Ethanol Content Display

If no Ethanol Content Sensor is installed, the user can specify ethanol content on the fly with cruise control rockers. This will also be used to automatically adjust the required parameters to the given ethanol level. Ethanol Content Override

Motiv ReFlex Support

MG Flasher will add the ability to log various parameters from the ReFlex module directly in the MG Flasher app with Custom Code (v7.2+ Coming Soon).

MG Flasher is able to log various parameters from the ReFlex module directly in the MG Flasher app, while also detecting errors from the ReFlex module and entering MG Flasher’s own Limp Mode.

Please see our instruction manual for up to date information on Motiv ReFlex Integration

Startup Roar & Cold Start

Users have the ability to disable the factory calibrated Cold Start. The Cold Start increases RPMs at idle when the engine is cold. Choosing this option lowers the RPMs which make for a quieter sound when starting a cold engine.

Alternatively, you can also enable the Startup Roar. This option enables a louder and more aggressive Startup Roar also known as “GTS Startup”. The roar duration and the aggression can be adjusted using the in app sliders. We recommend trying out various calibrations to decide which settings sound the best.

More Options

For a full, detailed list of options offered by MG Flasher, please see our Custom Options page, as well as our Custom Code page.

Please refer to our User Manual for up to date information, and stay tuned for announcements regarding updates with new features on our social media pages!

Subscribe to MG-Flasher

Keep yourselves in the loop by subscribing to our newsletter.

Contact details

MG Flasher

footer